Beading Jewelry Ideas with Jig
Showing search results for: jig Undo search
Wire Jig Necklace
This necklace was created using the Wire Wizard Deluxe Jig using a non-tarnish brass wire. A jig is a board with pegs in it that is useful for bending wire into specific shapes that can easily be replicated. They can be made out of wood or metal. Corrine’s jigs use metal pegs that you can […]
Peacock Stone Swirl Earrings
Using a thing-a-ma-jig I formed the earwires out of 18 gauge copper wire and filed the ends to make them smooth. I used the same 18 gauge wire through the 18mm square peacock stone to make the circle on the top and the swirl on the bottom. I bent the circle over the stone after […]
Copper Twist And Torqoise Earrings
These earrings were made by using a Thing-a-ma-jig to bend the copper wire. I cut a piece of copper about 7 inches long and made the pattern for the swirl. After putting the bead on the wire I used the same jig pattern to make the top swirl and used the extra wire at the […]
Buddha Necklace & Earrings
To start the necklace, I cut 3 pieces of beading wire, the first one longer for the focal point of the Buddha. I strung the charm, amazonite 4mm round beads, and bali saucers on the first length of wire and crimped both sides around small round pewter links. The round links are then attached to […]